Products
-
-
The company launches sustainable high-performance plastic
- 20 October 2021
-
-
-
The success of GraCELS-2 moved the parties closer to the production of commercial material for applications in aerospace structures and also for other applications
- 19 August 2021
-
-
-
A team of researchers from NTU’s School of Mechanical and Aerospace Engineering, in collaboration with French specialty materials leader Arkema, have developed a safer bicycle helmet using a combination of materials
- 23 July 2021
-
-
-
Braskem's new Polypropylene material for 3D printing and additive manufacturing is now available
- 20 July 2021
-
-
-
The new products not only increase part assembly efficiency but also offer unmatched processing flexibility
- 23 June 2021
-
-
-
The set-up of the machine is suitable for series production as well as for development applications (R&D)
- 18 June 2021
-
-
-
Focused on performance and innovation, the partnership has helped strengthen CCM in its leadership position for the hockey stick category
- 13 May 2021
-
-
-
On the occasion of the JEC Composites Connect, Roth Composite Machinery presents its engineering expertise
- 04 May 2021
-
-
-
Hexagon Purus has signed a long-term agreement with Nikola Corporation to develop and supply its high-performance type 4 hydrogen cylinders
- 30 April 2021
-
-
-
The leader in the 3D printing solutions introduced three new printers that together address a large portion of the multibillion-dollar market opportunity in additive manufacturing of end-use parts
- 28 April 2021
-
-
-
Researchers from Chalmers University of Technology in Gothenburg, Sweden, have produced a structural battery that performs ten times better than all previous versions
- 12 April 2021
-
-
-
The HT200 Plasma Reactor will be utilised in the 401 Tech Bridge Advanced Materials and Technology Center
- 31 March 2021
-
-
-
The UK company announced its partnership with Composite Envisions, a premier US based global distributor of composite materials & supplies
- 18 March 2021
-
-
-
Originally supported by NASA, this material was developed by Professor Kuang-Ting Hsiao's group at the University of South Alabama
- 17 March 2021
-
-
-
Over 600,000m2 of prepreg materials have been supplied for the building's external façade panels in Dubai
- 11 January 2021
-
-
-
Composites are one of the most in-demand material categories for manufacturing applications due to their enhanced properties compared to unfilled thermoplastics
- 18 December 2020
-
-
-
The company expects Origin’s proprietary Programmable PhotoPolymerization (P3) technology to be an important growth engine
- 09 December 2020
-
-
-
NAWA Technologies, pioneer of energy storage systems based on vertically aligned carbon nanotubes (VACNT), announces the establishment of a new company
- 24 November 2020
-
-
-
MakerBot’s Nylon 12 Carbon Fiber demonstrates strong physical and thermal properties, and can be used to print metal replacement parts in some applications
- 13 October 2020
-
-
-
The new project is the result of an ultra-lightweight thermoplastic composite structure combined with a patented propulsion system
- 08 October 2020
-
-
-
LS C&S has finished preparation for mass-production of LAN cables that will be used for equipment operation and system management in smart factories and buildings
- 25 September 2020
-
-
-
IMAL turned to CRP Technology for the manufacturing of the functional sensor housing box
- 11 September 2020
-
-
-
The objective of Covestro company was to construct a normal-sized table that is as thin as an Ultrabook
- 28 August 2020
-
-
-
AREVO announced the introduction of its newest system, the Aqua 2
- 18 August 2020
-
-
-
The Silicon Valley-based bicycle brand touts a true unibody construction for its new bike
- 03 August 2020
-
-
-
The Dutch company extends its European partner network with ClipCarbono from Spain and CarboSix from Italy and introduces high strength carbon panels
- 22 July 2020
-
-
-
The 25-inch model by Tuplus has front and back shells made of Maezio® thermoplastic composites from Covestro
- 17 June 2020
-
-
-
e-Xstream engineering, part of Hexagon's Manufacturing Intelligence division, has today launched the latest version of its Digimat multi-scale material modelling software
- 11 June 2020
-
-
-
Toray Industries, Inc., announced that it has created new materials that are ideal for injection molding
- 04 June 2020
-
-
-
The ProRail is known for its lightweight and durable design, utilizing carbon fiber composite TUFFSHELL® ACF Type 4 CNG Cylinders
- 28 May 2020
-
Subscribe newsletter
Become our Sponsor
Companies Area
Our sponsors
Our partners
Institutional partners
